3 NHTSA recall campaigns have been issued for the 2003 BMW X5. Click any campaign to view full defect, consequence, and remedy details.
Component: AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE
BMW of North America, LLC (BMW) is recalling certain 2000-2002 BMW 320i, 323i, 325i, 325xi, 330i, 330xi, 323Ci, 325Ci, 330Ci, M3, 323iT, 325iT and 325xiT vehicles, 2001-2002 525i, 530i, 540i, M5, 525iT and 540iT vehicles, and 2001-2003 X5 3.0i, X5 4.4i, and X5 4.6is vehicles. These vehicles may have had a driver-side air bag module installed as replacement equipment such as after a vehicle crash necessitating replacement of the original air bag, or as a remedy part for a prior recall. These replacement modules contain an air bag inflator that may rupture due to propellant degradation occurring after long-term exposure to lower absolute humidity, temperature and temperature cycling.
Consequence: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Full recall detail →
Component: AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE
BMW of North America, LLC (BMW) is recalling certain model year 2002-2005 325i, 325xi, 330i, and 330xi Sedans, and 325xi and 325i Sportswagons, 2002-2006 330Ci, 325Ci, and M3 Convertibles and 325i, 330i, and M3 Coupes, 2002-2003 M5, 540i, 525i Sedan, and 530i Sedans, and 540i and 525i Sportswagons, and 2003 X5 3.0i and 4.4i Sports Activity Vehicles. Please note that the 5-series and X5 vehicles are only included if they are equipped with the optional sports steering wheel. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion which, over time, could cause the inflator to rupture.
Consequence: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Full recall detail →
Component: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
ON CERTAIN PASSENGER VEHICLES, IT IS POSSIBLE THAT THE DISTANCE BETWEEN THE BRAKE LINE AND THE STEERING SHAFT JOINT IS NOT SUFFICIENT. IF THIS OCCURS, THE BRAKE LINE COULD COME INTO CONTACT WITH THE JOINT AND EVENTUALLY SUFFER DAMAGE AND CORROSION.
Consequence: A LOSS OF BRAKE FLUID, INDICATED BY A WARNING LIGHT IN THE INSTRUMENT PANEL, COULD OCCUR. THIS WILL BE ACCOMPANIED BY A REDUCTION IN FRONT BRAKE PERFORMANCE. THIS COULD LEAD TO A CRASH.
Full recall detail →