Loading vehicle data from NHTSA...
NHTSA recalls, safety ratings, and consumer complaints for the 2019 Jeep Wrangler.
| Overall Rating | Not Rated |
| Frontal Crash | Not Rated |
| Side Crash | Not Rated |
| Rollover | Not Rated |
Component: STRUCTURE:FRAME AND MEMBERS
Chrysler (FCA US LLC) is recalling certain 2018-2019 Jeep Wrangler vehicles. The front track bar brackets may be improperly welded, which can cause the bracket to separate from the frame, reducing steering capability.
Consequence: An unexpected reduction in steering ability, can increase the risk of a crash.
Remedy: Chrysler will notify owners, and dealers will inspect and repair the track bar bracket welds, as necessary, free of charge. The recall is expected to begin November 17, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is UA5.
Component: STEERING
Chrysler (FCA US LLC) is recalling certain 2019 Jeep Wrangler and 2019 Ram 1500 vehicles. These vehicles have improperly machined steering column stub shafts that may break, possibly causing the steering wheel to detach from the steering column.
Consequence: If the steering wheel detaches from the steering column, the driver may lose control of the vehicle, increasing the risk of crash.
Remedy: Chrysler will notify owners, and dealers will inspect the steering column, replacing it, as necessary, free of charge. The recall began April 5, 2019. Owners may contact FCA US customer service at 1-800-853-1403. Chrysler's number for this recall is V29.
I was driving my 2019 Jeep Wrangler Unlimited Sahara 2.0T/AT to the gym with my spouse. No Check Engine Light, Jeep Temps were perfect. All gauges operated as it should, so there was no sign of trouble. The vehicle was OFF. We parked and walked into the gym and then into the 1 set of exercises, Someone yelled in the gym that someone's truck was on fire. We ran outside and Lo and Behold it was our Jeep. The Engine Compartment Was totally Destroyed. Please Look At the Pictures for Reference.
The contact owns a 2019 Jeep Wrangler. The contact stated that while starting the vehicle, the instrument panel became inoperable, turning on and then shutting off. The contact stated that while driving, the instrument panel was blank. The vehicle was taken to the dealer, where it was diagnosed, and it was determined that the instrument cluster had failed and needed to be replaced. The vehicle was repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 103,000.
See attached document for complaint.
The 2019 Jeep Wrangler has 9 NHTSA recalls and 704 consumer complaints on file. It received an overall safety rating of Not Rated out of 5 stars in NHTSA crash testing. The high number of complaints suggests potential reliability concerns — review the complaint details above before purchasing. For the most detailed information about a specific vehicle, decode its VIN using our free decoder above.
Enter a specific VIN to get the full report — specs, recalls, safety ratings, complaints, investigations, and technical service bulletins.
Component: SEAT BELTS
Chrysler (FCA US LLC) is recalling certain 2019 Jeep Wrangler and Ram 2500, 2019-2020 Ram 1500 and 2020 Jeep Gladiator vehicles. In the event of a crash, a front seat belt retractor may not properly slow the occupant's forward movement after locking.
Consequence: In the event of a crash, if the front seat belts fail to lock, there is an increased risk of injury.
Remedy: Chrysler will notify owners, and dealers will replace the front seat belt retractors, free of charge. The recall began November 12, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W67.
Component: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Chrysler (FCA US LLC) is recalling certain 2020 Jeep Gladiator and Jeep Cherokee, 2019-2020 Ram 1500 Pickup, Ram 2500 Pickup, Ram 3500 Pickup, Chrysler Pacifica, Dodge Durango, Jeep Grand Cherokee, Jeep Wrangler, and Jeep Renegade and 2019 Dodge Challenger vehicles equipped with 8.4" or 12" radio displays. A software error can cause the rearview camera image to remain displayed after the vehicle has been shifted out of reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."
Consequence: The lingering rearview image can distract the driver, increasing the risk of a crash.
Remedy: Chrysler has notified owners, and dealers will update the radio display software, free of charge. Optionally, owners can choose to remotely update their software via an Over-The-Air (OTA) update available as of May 1, 2020. The recall began April 27, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W30-W37.
Component: POWER TRAIN:CLUTCH ASSEMBLY
Chrysler (FCA US, LLC) is recalling certain 2018-2021 Jeep Wrangler and 2020-2021 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
Consequence: Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
Remedy: FCA US LLC will notify owners, and dealers will add software to reduce engine torque capability when clutch assembly temperatures rise to a level that may damage the inner pressure plate, free of charge." FCA has ordered a stop sale for the affected vehicles as of February 25, 2021. Owner notification letters were mailed on March 4, 2021.
Component: POWER TRAIN:CLUTCH ASSEMBLY
Chrysler (FCA US LLC) is recalling certain 2018-2020 Jeep Wrangler and 2020 Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
Consequence: The overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
Remedy: Chrysler will notify owners, and dealers will reroute a wire harness and inspect the clutch system, and replace components as needed. The recall began April 30, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W12.
Component: POWER TRAIN:CLUTCH ASSEMBLY
Chrysler (FCA US, LLC) is recalling certain 2018-2023 Jeep Wrangler, and 2020-2023 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
Consequence: Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
Remedy: Dealers will replace the clutch assembly and update the software, free of charge. Owner notification letters were mailed from November 16, 2023 through July 25, 2024. Owners may contact (FCA US, LLC) customer service at 1-800-853-1403. FCA US LLC's number for this recall is 19A. This recall expands and replaces previous recall 21V-028. Vehicles previously repaired under recall 21V-028 will need to have the new remedy completed.
Component: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
Chrysler (FCA US, LLC) is recalling certain 2020-2024 Jeep Gladiator and 2018-2024 Jeep Wrangler vehicles. The instrument panel cluster may experience an internal short circuit and fail. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 101, "Controls and Displays."
Consequence: An instrument panel that fails to display critical safety information, such as the speedometer or warning lights, can increase the risk of a crash.
Remedy: Dealers will replace the instrument panel cluster, free of charge. Owner notification letters were mailed between October 3, 2024, and January 23, 2025. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 30B.
Component: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Chrysler (FCA US, LLC) is recalling certain 2018-2024 Jeep Wrangler vehicles. The wiring harness for the rearview camera and the center brake light may short circuit, which can disable the rearview camera image and center brake light. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 111, "Rear Visibility" and 108, "Lamps, Reflective Devices, and Associated Equipment."
Consequence: A rearview camera image that does not display decreases the driver's visibility, increasing the risk of a crash. Additionally, a center brake light that fails to illuminate can fail to indicate to other drivers that the vehicle is slowing down, increasing the risk of a crash.
Remedy: Dealers replaced the harness for the center brake light and rearview camera and/or the spare tire carrier/harness assembly, as necessary, free of charge. All vehicles were repaired by January 15, 2024. Owner notification letters were mailed September 26, 2024. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 77B.
Instrument panel cluster dashboard failure, found a massive recall online for Wranglers 2018-2024 for this issue, called dealer who informed us our VIN was not under this recall, but we have a Wranger 2019 with the same issue so should definitely qualify. Called JEEP who informed us our VIN was not under this recall and they won’t do anything about it. This issue is deemed a SAFETY HAZZARD per recall, and we do qualify but they say our VIN specifically does not. This has to be illegal as well as unsafe. Unable to see mileage, gas, safety alerts, etc. because of outage.
RE: Safety Concern – Instrument Cluster Failure Consistent with NHTSA Recall 24V-652 Dear Sir or Madam: Regarding our 2019 jeep wrangler vin# Milage of 74602.9 on 3-22-26 We are writing to report a safety-related defect involving a 2019 Jeep vehicle exhibiting instrument cluster malfunction consistent with conditions described in NHTSA Recall No. 24V-652 (FCA US LLC). Although this vehicle is not currently included within the recall’s identified VIN population, it is exhibiting substantially similar symptoms, including: Intermittent loss of speedometer function Tachometer irregularities Intermittent or complete failure of the instrument cluster display Recall 24V-652 identifies a defect in the instrument panel cluster (IPC) which may result in loss of critical driver information. As recognized by the National Highway Traffic Safety Administration, such failures may increase the risk of a crash due to the driver’s inability to accurately monitor vehicle speed and operating conditions. Given the similarity between the observed condition and the defect described in the recall, this raises a concern that the issue may extend beyond the currently defined VIN range. Accordingly, we request: A formal review of this vehicle for potential inclusion within Recall 24V-652 or any related service campaign; and Appropriate corrective action consistent with applicable safety and warranty obligations. We will also be submitting this matter to the National Highway Traffic Safety Administration (NHTSA) for further review. Please advise regarding next steps. Nothing in this correspondence shall be construed as a waiver of any rights or remedies, all of which are expressly reserved. Sincerely,
Engine lights on Glass Recalibration failed multiple times. Engine failure when Jeep comes to a complete stop vehicle totally shuts down and needs to be restarted. When manufacture was contacted: not able to sell new engine. Resolution used engine with same issue. No real Resolution.
The contact owns a 2019 Jeep Wrangler. The contact stated that while driving at an undisclosed speed, there was a misfire coming from the engine, and there was a backfire coming from the exhaust system. Additionally, there was a coolant intrusion in cylinder #3 and a burning in the head gasket. The contact stated that the engine overheated and the vehicle failed to restart after it was turned off. The catastrophic engine failure was attributed to coolant intrusion into the combustion chamber, which caused severe internal damage. The vehicle was towed to an independent mechanic, where the engine was being replaced. The vehicle was not yet repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 61,000.
Jeep Wranglers in the older/early models had aluminum steering steering boxes that would have excessive play do to thermal expansion. Jeep never made it recall but did provide a TSB NUMBER: 08-074-20 REV. B GROUP: 08- Electrical DATE: September 26, 2020. The TSB would recommend the aluminum steering box be replaced with a steel one. The issue is that many dealers refused to do the fix/change parts for free under or out of warranty. Its clearly an issue as later/newer models of the Jeep JL Wrangler started shipping with the steel steering box.
The contact owns a 2019 Jeep Wrangler. The contact stated that while driving approximately 50 MPH, the contact experienced the death wobble, and the vehicle started shaking violently. There was no warning light illuminated. The driver was able to maintain control of the vehicle; however, the vehicle failed to exceed 50 MPH without the failure recurring. The vehicle was taken to an independent mechanic, where it was diagnosed and determined that the track bar had failed and needed to be replaced. The vehicle was not repaired. The vehicle was also taken to the dealer, where it was determined that the track bar had failed and needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The approximate failure mileage was 84,000.
Since new Jeep has experienced "excess play in the steering" the Jeeps steering "wanders" and vehicle pulls to both the left and right. Steering wandering increases in hot temperatures and at higher speeds and becomes UNSAFE to operate the vehicle. When purchasing new, I noticed the "excess play in the steering", but was told by the Jeep salesperson that "that's how Jeeps drive" and "They do not drive like typical passenger vehicles". I did not take my Jeep in for service for this issue because the salesperson told me that this is how the vehicle is designed to drive. However, I recently found out that Jeep issued a Technical Service Bulletin #08-074-20 REV.B back on September 26, 2020 that addresses this issue of "excess play in the steering" and "wandering" and the TSB gives recommendations to fix the steering by installing a new and improved Steering Gear Box that is made from steel as opposed to aluminum. I took my Jeep into a Jeep dealership with regards to this issue. The Jeep dealership confirmed that I have the "old style" steering gearbox mentioned in Technical Service Bulletin #08-074-20 REV.B and recommended that I replace it with the new design as recommended by the TSB. I asked Jeep to repair by vehicle free of charge as this is a "known" issue on Jeep Wrangler JL 2018-2020 as described in the TSB, but Jeep refused to pay for the safetly modification to my steering, stating that I am "out of the warranty period". This is a KNOWN manufacture defect. Jeep installed inferior aluminum steering gear boxes on their Jeep Wrangler JL 2018-2020 and 2020 Jeep Gladiators and they have since upgraded that critical safety component to a "steel version." Jeep should without question issue a "recall" to fix all current Jeep owners 2018-2020 Wrangler JLs and 2020 Jeep Gladiators that have a faulty aluminum steering gear box and replace it with the upgraded steel version that fixes the "wandering steering" and "excess play in the steering".
My gauge cluster is having a problem and I dont know why my jeep is covered under the recall when its the same part in every other jeep that is having the same problem? I would really like to know how used can pick one Jeep model and not the others? When all the same parts are in the jeeps
The contact owns a 2019 Jeep Wrangler. While the contact’s wife was driving with the heated steering wheel activated, the driver attempted to adjust the steering wheel position, and suddenly an electrical short occurred, causing white smoke to come from the center of the steering wheel. The vehicle was immediately stopped, and the heated steering wheel and heated seats were deactivated. The cause of the failure was not yet determined. The manufacturer and local dealer were notified of the failure, but no assistance was offered. The failure mileage was 82,000.
around august of 2025 the gauge cluster went black and i can no longer see my total miles, gas gauge, and any warning lights that may appear on screen i.e. door ajar. because of this, i have almost gotten in car accidents because my gas runs out unknowingly. one time it put me in serious danger on the interstate having to add gas while cars were flying past me. there were no warning lights, check engine lights, or any other lights that would suggest failure. it just went black one day random day. we recently got into a car accident, this occurred after it had gone out and upon inspection the mechanic confirmed it was not associated with the accident and suggested looking into recall because jeep currently has recalls on gauge clusters, which is why i am reporting now. it is available for inspection upon request.
My Jeep Wrangler when driving 65mph or higher starts to wooble making it very hard to control. Usually it happens when there is small bumps roughness in the road. This issue started since it got to the 22K miles.
I was driving on the interstate and when I went over a little bump my truck started to shake like it was going to loose control. I read up on this and people who own jeeps refer to it as the death waddle is there a recall on this issue.
Showing 15 of 704 complaints